We are exceptionally pleased that not only is CAN-BACK manufactured in the United States, most of its materials are manufactured in the United States as well.
The CAN-BACK is the premium quality canvas camper shell for your pickup truck.
Its eye-catching looks and features are constructed from the highest quality materials available.
The CAN-BACK has built-in mounting locations for up to four cross bars on the 5ft to 6.5ft bed trucks, and six cross bars on 8ft bed trucks.
Each cross bar can support 75 lbs. The optional reinforcement kit will double this capacity, allowing 150 lbs per cross bar, for a total carrying capacity of 600 lbs with four cross bars on a short bed truck.
The CAN-BACK mounts to the outside of the truck's bed rail for a streamlined look.
The CAN-BACK hoop structure provides a clean, flat roof.
The cross bars are level to evenly support a load.
Open hoop structure allows easy access to cargo.
The CAN-BACK front hoop matches the angle of the back of the cab.
The CAN-BACK's standard windows are solid canvas.
Optional windows are:
-Strataglass Smoke Tinted, Vinyl Window (as shown on right)
-Mesh Window (as shown on left)
The CAN-BACK's side panels are divided into forward and rear panels. Each side panel, as well as the cab and tailgate panels, can be individually rolled up and secured to the top panel. Or they can be unzipped and completely removed.
The canvas/vinyl/mesh side panels can be mixed-and-matched.
The CAN-BACK's roof panel and side panels are firmly strapped to each of the hoops, assuring that the canvas remains tight and silent at any speed.
The top panel is supported by straps to handle snow loads.
Sunbrella Supreme top panel is waterproof
Sunbrella Plus side panels are breathable
Stainless Steel Frame Structure
Strataglass Smoke Tinted Vinyl Windows
Eight, no-drill clamps secure the frame to the truck
Optional drill mounting configuration with hidden bolts for a clean, streamlined look.
PlasmaGlow, rear light provides Turn, Brake, and Reverse signals
Made in the USA
2 Year Warranty
The CAN-BACK is resuming production, however it will take a while to work through the backlog. The items listed below are currently in production. CAN-BACK will produce models to fit most of the trucks made since 1999 as well as the K5 Blazers, Early and Full Size Broncos, and the Toyota 4-Runner SUV tops, but it will take until Fall of 2016 to bring these into production.
If your vehicle is not yet listed, please visit the CAN-BACK website to determine the production sequence and to put your name on the Production Notification list for your vehicle.
Select Vehicle's Year, Make and Model:
Can-Back Premium Canvas Camper Shell
76-91 CHEVY Blazer K5
2014 CHEVY Silverado 1500 5.5ft Bed
2014 CHEVY Silverado 1500 6.5ft Bed
2014 CHEVY Silverado 1500 8ft Bed
99-06 CHEVY Silverado 5.5ft Bed
15-18 CHEVY Silverado 5.5ft Bed
99-06 CHEVY Silverado 6.5ft Bed
15-18 CHEVY Silverado 6.5ft Bed
99-06 CHEVY Silverado 8ft Bed
15-18 CHEVY Silverado 8ft Bed
09-18 DODGE Ram 5.5ft Bed
09-18 DODGE Ram 6.5ft Bed
09-18 DODGE Ram 8ft Bed
99-14 FORD F150 5.5ft Bed
15-18 FORD F150 5.5ft Bed
99-14 FORD F150 6.5ft Bed
15-18 FORD F150 6.5ft Bed
99-16 FORD F250/F350 6.5ft Bed
99-16 FORD F250/F350 8ft Bed
76-91 GMC Jimmy
2014 GMC Sierra 1500 5.5ft Bed
2014 GMC Sierra 1500 6.5ft Bed
2014 GMC Sierra 1500 8ft Bed
99-06 GMC Sierra 5.5ft Bed
15-18 GMC Sierra 5.5ft Bed
99-06 GMC Sierra 6.5ft Bed
15-18 GMC Sierra 6.5ft Bed
99-06 GMC Sierra 8ft Bed
15-18 GMC Sierra 8ft Bed
05-15 TOYOTA Tacoma 5ft Bed
16-18TOYOTA Tacoma 5ft Bed
05-15 TOYOTA Tacoma 6ft Bed
16-18TOYOTA Tacoma 6ft Bed
14-18 TOYOTA Tundra 5.5ft Bed
14-18 TOYOTA Tundra 6.5ft Bed
All kits are vehicle-specific.
Please call to place your order if ordering without a CANBACK.
ONLY the Cross Bars kits will work on previous versions of the CAN-BACK.
The Window Kits and Cross Bar Reinforcement Kits are not available for previous versions of the CAN-BACK.
Cross Bar - 4 inch Tall Single Cross Bar with two Mounting Brackets
Approximately 4" from top of canvas to top of cross bar.
Lower profile design suitable for loads that do not require clearance under the cross bar.
Cross Bar - 7in Tall Single Cross Bar with two Mounting Brackets
Approximately 7" from top of canvas to top of cross bar.
Suitable for mounting a LED lights (a bar or 4" square or round lights ) under the cross bars or for carrying loads that drop down below the cross bars, such as canoes or kayaks.
Cross Bar Reinforcement Kit - Reinforces 2 Cross Bars
Provides extra support structure to double the load capacity of the cross bars to 150lbs each.
Vinyl Window Front Side Panel Kit for 4.5ft to 6.5ft Bed Trucks
Vinyl Window Rear Side Panel Kit for 4.5ft to 6.5ft Bed Trucks
Vinyl Window Front Side Panel Kit for 7ft to 8ft Bed Trucks
Vinyl Window Middle Side Panel Kit for 7ft to 8ft Bed Trucks
Vinyl Window Rear Side Panel Kit for 7ft to 8ft Bed Trucks
Mesh Window Front Side Panel Kit for 4.5ft to 6.5ft Bed Trucks
Mesh Window Rear Side Panel Kit for 4.5ft to 6.5ft Bed Trucks
Mesh Window Front Side Panel Kit for 7ft to 8ft Bed Trucks
Mesh Window Middle Side Panel Kit for 7ft to 8ft Bed Trucks
Mesh Window Rear Side Panel Kit for 7ft to 8ft Bed Trucks